Close

ANSI Standard

Manufactured in accordance with the ANSI B29.1 standards, Renold Roller Chain is designed and built to provide maximum strength and wear life. Solid cold forged bushings, wide waist link plates and appropriate press fits are only a few of the reasons it outperforms any competitive roller chain, except for Renold Synergy. Our exclusive new end-softened pin heads also make for easy installation and removal.

 

Product features include:

  • End-softened pins
  • Solid bushings and rollers
  • Wide waist link plates
  • High hardness carburized pins and bushings
  • Near zero initial stretch
  • Superior strength
  • Maximum wear life
  • Anti-collapse bushing design

 

 

Roller Chain Illustration Dimensions

 

ANSI Roller Chain No. 25, 35, 41

Chain No. Pitch inch Inside Width
Min		 Roller diam
Max		 Plate Height
Max		 Inner Plate Thickness
Max		 Outer Plate Thickness
Max		 Pin
 Diam
Max		 Pin Length
Max		 Conn Link Extension
Max		 Transverse Pitch
Nom		 Tensile
Strength
Min		 Mass
  A B C D E F G H1 J K Lbs Lbs/Ft
25 0.250 0.122 0.130 0.237 0.030 0.030 0.091 0.359 0.031   780 0.09
25-2 0.250 0.122 0.130 0.237 0.030 0.030 0.091 0.611 0.031 0.252 1,560 0.17
25-3 0.250 0.122 0.130 0.237 0.030 0.030 0.091 0.859 0.031 0.252 2,340 0.26
35 0.375 0.184 0.200 0.356 0.049 0.049 0.141 0.473 0.043   1,760 0.23
35-2 0.375 0.184 0.200 0.356 0.049 0.049 0.141 0.875 0.043 0.399 3,520 0.47
35-3 0.375 0.184 0.200 0.356 0.049 0.049 0.141 1.269 0.043 0.399 5,280 0.70
35-4 0.375 0.184 0.200 0.356 0.049 0.049 0.141 1.665 0.043 0.399 7,040 0.82
35-5 0.375 0.184 0.200 0.356 0.049 0.049 0.141 2.063 0.043 0.399 8,800 1.05
35-6 0.375 0.184 0.200 0.356 0.049 0.049 0.141 2.462 0.043 0.399 10,560 1.27
41 0.500 0.246 0.306 0.390 0.050 0.050 0.141 0.571 0.055   1,500 0.28

 

ANSI Roller Chain No. 40, 50, 60, 80

Chain No. Pitch inch Inside Width
Min		 Roller diam
Max		 Plate Height
Max		 Inner Plate Thickness
Max		 Outer Plate Thickness
Max		 Pin
 Diam
Max		 Pin Length
Max		 Conn Link Extension
Max		 Transverse Pitch
Nom		 Tensile
Strength
Min		 Mass
  A B C D E F G H1 J K Lbs Lbs/Ft
40 0.500 0.309 0.312 0.475 0.061 0.061 0.156 0.646 0.055   3,125 0.40
40-2 0.500 0.309 0.312 0.475 0.061 0.061 0.156 1.214 0.055 0.566 6,250 0.80
40-3 0.500 0.309 0.312 0.475 0.061 0.061 0.156 1.777 0.055 0.566 9,375 1.21
40-4 0.500 0.309 0.312 0.475 0.061 0.061 0.156 2.364 0.055 0.566 12,500 1.65
40-5 0.500 0.309 0.312 0.475 0.061 0.061 0.156 2.938 0.055 0.566 15,625 2.10
40-6 0.500 0.309 0.312 0.475 0.061 0.061 0.156 3.505 0.055 0.566 18,750 2.53
50 0.625 0.370 0.400 0.594 0.080 0.080 0.200 0.804 0.043   4,880 0.67
50-2 0.625 0.370 0.400 0.594 0.080 0.080 0.200 1.513 0.043 0.713 9,760 1.34
50-3 0.625 0.370 0.400 0.594 0.080 0.080 0.200 2.226 0.043 0.713 14,640 2.01
50-4 0.625 0.370 0.400 0.594 0.080 0.080 0.200 2.963 0.043 0.713 19,520 2.68
50-5 0.625 0.370 0.400 0.594 0.080 0.080 0.200 3.672 0.043 0.713 24,400 3.35
50-6 0.625 0.370 0.400 0.595 0.080 0.080 0.200 4.385 0.043 0.713 29,280 4.02
60 0.750 0.495 0.469 0.713 0.094 0.094 0.235 0.997 0.043   7,030 0.98
60-2 0.750 0.495 0.469 0.713 0.094 0.094 0.235 1.895 0.043 0.897 14,060 1.98
60-3 0.750 0.495 0.469 0.713 0.094 0.094 0.235 2.793 0.043 0.897 21,090 2.97
60-4 0.750 0.495 0.469 0.713 0.094 0.094 0.235 3.719 0.043 0.897 28,120 3.97
60-5 0.750 0.495 0.469 0.713 0.094 0.094 0.235 4.606 0.043 0.897 35,150 4.96
60-6 0.750 0.495 0.469 0.713 0.094 0.094 0.235 5.524 0.043 0.897 42,180 5.80
80 1.000 0.620 0.625 0.950 0.128 0.128 0.313 1.288 0.118   12,500 1.88
80-2 1.000 0.620 0.625 0.950 0.128 0.128 0.313 2.439 0.118 1.153 25,000 3.69
80-3 1.000 0.620 0.625 0.950 0.128 0.128 0.313 3.593 0.118 1.153 37,500 5.56
80-4 1.000 0.620 0.625 0.950 0.128 0.128 0.313 4.756 0.118 1.153 50,000 7.50
80-5 1.000 0.620 0.625 0.950 0.128 0.128 0.313 5.906 0.118 1.153 62,500 9.38
80-6 1.000 0.620 0.625 0.950 0.128 0.128 0.313 7.068 0.118 1.153 75,000 11.26

 

ANSI Roller Chain No. 100, 120, 140, 160

Chain No. Pitch inch Inside Width
Min		 Roller diam
Max		 Plate Height
Max		 Inner Plate Thickness
Max		 Outer Plate Thickness
Max		 Pin
 Diam
Max		 Pin Length
Max		 Conn Link Extension
Max		 Transverse Pitch
Nom		 Tensile
Strength
Min		 Mass
  A B C D E F G H1 J K Lbs Lbs/Ft
100 1.250 0.744 0.750 1.188 0.160 0.160 0.376 1.564 0.165   19,530 2.81
100-2 1.250 0.744 0.750 1.188 0.160 0.160 0.376 2.971 0.165 1.408 39,060 5.63
100-3 1.250 0.744 0.750 1.188 0.160 0.160 0.376 4.381 0.165 1.408 58,590 8.44
100-4 1.250 0.744 0.750 1.188 0.160 0.160 0.376 5.796 0.165 1.408 78,120 11.26
100-5 1.250 0.744 0.750 1.188 0.160 0.160 0.376 7.206 0.165 1.408 97,650 14.07
100-6 1.250 0.744 0.750 1.188 0.160 0.160 0.376 8.617 0.165 1.408 117,180 16.88
120 1.500 0.993 0.875 1.425 0.189 0.189 0.437 1.942 0.209   28,125 3.82
120-2 1.500 0.993 0.875 1.425 0.189 0.189 0.437 3.731 0.209 1.789 56,250 7.37
120-3 1.500 0.993 0.875 1.425 0.189 0.189 0.437 5.524 0.209 1.789 84,375 11.19
120-4 1.500 0.993 0.875 1.425 0.189 0.189 0.437 7.317 0.209 1.789 112,500 15.28
120-5 1.500 0.993 0.875 1.425 0.189 0.189 0.437 9.109 0.209 1.789 140,625 18.36
120-6 1.500 0.993 0.875 1.425 0.189 0.189 0.437 10.898 0.209 1.789 168,750 22.45
140 1.750 0.993 1.000 1.663 0.221 0.211 0.500 2.084 0.205   38,280 5.23
140-2 1.750 0.993 1.000 1.663 0.221 0.221 0.500 4.011 0.205 1.924 76,560 10.39
140-3 1.750 0.993 1.000 1.663 0.221 0.221 0.500 5.938 0.205 1.924 114,840 15.48
140-4 1.750 0.993 1.000 1.663 0.221 0.221 0.500 7.868 0.205 1.924 153,120 20.64
140-5 1.750 0.993 1.000 1.663 0.221 0.221 0.500 9.799 0.205 1.924 191,400 25.53
140-6 1.750 0.993 1.000 1.663 0.221 0.221 0.500 11.722 0.205 1.924 229,680 30.31
160 2.000 1.242 1.125 1.900 0.250 0.250 0.563 2.486 0.256   50,000 6.97
160-2 2.000 1.242 1.125 1.900 0.250 0.250 0.563 4.791 0.256 2.305 100,000 13.80
160-3 2.000 1.242 1.125 1.900 0.250 0.250 0.563 7.100 0.256 2.305 150,000 20.77
160-4 2.000 1.242 1.125 1.900 0.250 0.250 0.563 9.409 0.256 2.305 200,000 27.60
160-5 2.000 1.242 1.125 1.900 0.250 0.250 0.563 11.710 0.256 2.305 250,000 34.64
160-6 2.000 1.242 1.125 1.900 0.250 0.250 0.563 14.015 0.256 2.305 300,000 41.54

 

ANSI Roller Chain No. 180, 200, 240

Chain No. Pitch inch Inside Width
Min		 Roller diam
Max		 Plate Height
Max		 Inner Plate Thickness
Max		 Outer Plate Thickness
Max		 Pin
 Diam
Max		 Pin Length
Max		 Conn Link Extension
Max		 Transverse Pitch
Nom		 Tensile
Strength
Min		 Mass
  A B C D E F G H1 J K Lbs Lbs/Ft
180 2.250 1.397 1.406 2.139 0.281 0.281 0.688 2.782 0.311   63,280 9.34
180-2 2.250 1.397 1.406 2.139 0.281 0.281 0.688 5.378 0.311 2.592 126,560 18.57
180-3 2.250 1.397 1.406 2.139 0.281 0.281 0.688 7.971 0.311 2.592 189,840 27.81
180-4 2.250 1.397 1.406 2.139 0.281 0.281 0.688 10.563 0.311 2.592 253,120 37.05
180-5 2.250 1.397 1.406 2.139 0.281 0.281 0.688 13.156 0.311 2.592 316,400 46.36
180-6 2.250 1.397 1.406 2.139 0.281 0.281 0.688 15.748 0.311 2.592 379,680 55.61
200 2.500 1.490 1.562 2.377 0.320 0.320 0.782 3.030 0.355   78,125 11.59
200-2 2.500 1.490 1.562 2.377 0.320 0.320 0.782 5.851 0.355 2.817 156,250 23.05
200-3 2.500 1.490 1.562 2.377 0.320 0.320 0.782 9.023 0.355 2.817 234,375 34.30
200-4 2.500 1.490 1.562 2.377 0.320 0.320 0.782 11.489 0.355 2.817 312,500 46.10
200-5 2.500 1.490 1.562 2.377 0.320 0.320 0.782 13.955 0.355 2.817 390,625 57.15
200-6 2.500 1.490 1.562 2.377 0.320 0.320 0.782 16.422 0.355 2.817 468,750 68.61
240 3.000 1.864 1.875 2.852 0.375 0.375 0.938 3.719 0.414   112,500 16.75
240-2 3.000 1.864 1.875 2.852 0.375 0.375 0.938 7.179 0.414 3.458 225,000 33.50
240-3 3.000 1.864 1.875 2.852 0.375 0.375 0.938 10.642 0.414 3.458 337,500 50.25
240-4 3.000 1.864 1.875 2.852 0.375 0.375 0.938 14.101 0.414 3.458 450,000 67.00
240-5 3.000 1.864 1.875 2.852 0.375 0.375 0.938 17.561 0.414 3.458 562,500 83.75
240-6 3.000 1.864 1.875 2.852 0.375 0.375 0.938 21.020 0.414 3.458 675,000 100.50